Spend more to unlockfor FREE shipping.
LIGHTNING FAST SAME DAY DISPATCH FOR ORDERS PLACED PRIOR TO 2PM MONDAY - FRIDAY. 

1 review

Gundam Factory Yokohama SDCS RX-78F00 Gundam

$36.99 AUD
The moving full-scale Yokohama Gundam at SD Cross Silhouette size. All-new exterior sculpt on the included Cross Silhouette frame, with elbow and knee joints and a dedicated beam rifle grip hand. Snap-fit with no glue or nippers needed, and it comes from a venue that closed in 2024.
From $10
4 × $9.24
Key features
  1. Limited Yokohama release: first sold at Gundam Factory Yokohama from December 2020, a venue that closed on 31 March 2024.
  2. All-new exterior parts: Bandai sculpted the armour fresh instead of reusing the standard SDCS RX-78-2, with a different rifle, shield and backpack per one builder comparison.
  3. Cross Silhouette frame included: elbow and knee joints on a slim SD body, plus five hand parts including a rifle grip hand.
Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Gundam Factory Yokohama SDCS RX-78F00 Gundam

The moving Yokohama Gundam, shrunk to SD Cross Silhouette size

This is the SD Gundam Cross Silhouette take on the RX-78F00, the full-scale moving Gundam that stood at Gundam Factory Yokohama. It was first sold at the Yokohama venue from December 2020 and later offered through Premium Bandai, and the Yokohama site closed for good on 31 March 2024. Bandai sculpted the exterior parts fresh for this kit rather than recolouring the standard SDCS RX-78-2, and one builder who compared the two found the rifle, shield and backpack differ from the regular release.

Build difficulty

Skill Level 1. Bandai lists the kit as snap-fit with no glue and no nippers needed, and rates it for ages 8 and up. One Japanese builder reported finishing it in about an hour straight from the box with no painting or panel lining. A foil seal sheet covers the small details. It suits a first SD kit or a quick evening build.

Technical highlights

  • Cross Silhouette frame included. The box states "CS frame included", and one builder write-up confirms there is no SD frame in the box.
  • Elbow and knee joints on a slim SD body, with slim proportions that one review notes sets it apart from the standard SDCS Gundam.
  • Five hand parts, including a hand shaped to grip the beam rifle, so it can hold its weapon without improvising.
  • Extra panel-line detail across the exterior for an SD-scale kit.

What makes this kit special

  • Based on a real moving Gundam: the design comes from the RX-78F00 at Gundam Factory Yokohama, the full-scale Gundam statue built to move.
  • All-new exterior parts: Bandai's own product text describes the armour as completely newly moulded for this release.
  • Cross Silhouette frame: a posable inner frame, as used across the SDCS line.
  • Limited venue release: a Gundam Factory Yokohama limited edition from a site that no longer operates.

What's in the box

  • Pre-coloured runners in white, red, blue, yellow, grey and black
  • Cross Silhouette frame parts
  • Beam rifle
  • Beam saber
  • Shield
  • Five hand parts: an open pair, a closed pair and one beam rifle grip hand
  • Foil seal sheet
  • Instruction manual

Not included: an SD frame, and the clear Action Base shown in Bandai's promotional photography (sold separately).

Compatible accessories

Bandai's promotional photography shows the kit posed on a clear Action Base, noting that the base is sold separately. It is not part of this kit.

Build your SD Gundam collection

Currently in stock at Mecha Express: Bandai SDCS Tornado Gundam from the same Cross Silhouette line, and Bandai SDBB Gundam Barbatos Lupus DX.

Build specifications

  • Line: SD Gundam Cross Silhouette (SDCS)
  • Release: Gundam Factory Yokohama limited edition, December 2020
  • Design: RX-78F00 Gundam (Gundam Factory Yokohama moving full-scale Gundam)
  • Manufacturer: Bandai Spirits
  • Retail box weight: approx. 211 g (box approx. 30.5 x 20.3 x 5.1 cm)
  • Barcode: 4573102605764
  • Skill Level: 1 (Beginner)
  • Assembly: Snap-fit, no glue or nippers needed (Bandai)
  • Paint required: No, parts are pre-coloured
  • Recommended age: 8 years and up (Bandai)

Perfect for

  • Fans of the Gundam Factory Yokohama moving Gundam who want it on the shelf at a small size
  • Collectors of limited venue releases
  • SDCS builders who want a fresh RX-78 sculpt instead of the standard release
  • First-time builders after a quick, tool-light kit

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink.

What to watch for

Drawing on a review site and two Japanese builder blogs. Coverage of this specific kit is thin and mostly Japanese-language, so treat the points below as single-reviewer notes rather than confirmed patterns:

  • One builder found the shield mounts on the side of the arm or on the back connection point and cannot be held in the hand, which limits some poses.
  • One builder noted simple moulding on the head vulcans and lower backpack thrusters, and no colour separation on the rear waist armour.
  • One reviewer noted the beam saber on the backpack cannot be removed and is moulded in plain white, so it looks flat unless you paint it.

The write-ups we read were broadly positive about the all-new sculpt for an SD kit.

Build notes

No glue, and no nippers needed per Bandai, since parts come off by hand. A hobby knife is optional for tidying any leftover gate marks if you want a cleaner finish. The yellow cross on the shield is a foil seal, so take your time lining it up. Suitable for ages 8 and up per Bandai.

Last updated: 14 October 2026 (AEST)

Bandai SD & Cross Silhouette Gundam

Let's talk about the amazing world of SD, BB, and Cross Silhouette Gunpla. Ever fancy building cute yet badass models? Super Deformed and BB Senshi Gunpla is where it's at. These kits are recognized for their exaggerated and cartoonish proportions.  They're a cinch to assemble, yet loaded with intricate details...

Read More
Bandai SD & Cross Silhouette Gundam

Assembly Guide

Skill Level.1. Most adults & children can assemble Skill Level 1 kits with little to no difficulty. Very basic hobby tools are recommended including a pair of nippers, a hobby knife, but are not essential. No Glue is needed for these kits. Kits are all snap together build and most parts can be removed by twisting and pushing without the need to snip with nippers.

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

What is the SDCS RX-78F00 Gundam?

It is the SD Gundam Cross Silhouette version of the RX-78F00, the full-scale moving Gundam that stood at Gundam Factory Yokohama. Bandai released it as a Yokohama limited edition in December 2020, and it was later offered through Premium Bandai.

Does it need glue, paint or nippers?

Bandai lists it as no glue and no nippers. The parts are pre-coloured and a foil seal sheet covers the small details, so no painting is needed for a clean build.

What's included in the box?

The Cross Silhouette frame parts, beam rifle, beam saber, shield, five hand parts (an open pair, a closed pair and a beam rifle grip hand), a foil seal sheet and the instruction manual. An SD frame and an Action Base are not included.

Can the shield be held in the hand?

One Japanese builder review reports that the shield mounts on the side of the arm or on the back connection point rather than being held in the hand.

Is the SDCS RX-78F00 suitable for first-time builders?

Yes. It is Skill Level 1, snap-fit with no glue or nippers needed, and Bandai rates it for ages 8 and up. One builder reported about an hour from box to finished kit.