Spend more to unlockfor FREE shipping.
LIGHTNING FAST SAME DAY DISPATCH FOR ORDERS PLACED PRIOR TO 2PM MONDAY - FRIDAY. 
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth front view in olive and yellow with a long rifle in the right hand and a chainsaw weapon on the left arm.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth rear three-quarter view with shoulder weapons mounted.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official retail box artwork, rated 8+, showing Milk Tooth and other Armored Core units.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render on a dark background with a large weapon raised over the shoulder.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with callouts naming the HC-3000, CC-3000, AC-3000, 2C-3000 and BC-0400 part groups.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with a callout showing the WB-0010 Double Trouble chainsaw in its retracted and released versions.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with a callout showing the WB-0000 Bad Cook rifle.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with callouts showing the BML-G2/P19SPL-12 and SB-033M Morley weapons.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG close-ups of the 3mm joints used for shoulder and left-arm weapons.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth weapons laid out on a blue panel: rifle, shoulder pack, two chainsaw versions and joint parts.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render shown beside the separately sold RaD CC-2000 Orbiter for comparison.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth front view in olive and yellow with a long rifle in the right hand and a chainsaw weapon on the left arm.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth rear three-quarter view with shoulder weapons mounted.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official retail box artwork, rated 8+, showing Milk Tooth and other Armored Core units.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render on a dark background with a large weapon raised over the shoulder.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with callouts naming the HC-3000, CC-3000, AC-3000, 2C-3000 and BC-0400 part groups.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with a callout showing the WB-0010 Double Trouble chainsaw in its retracted and released versions.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with a callout showing the WB-0000 Bad Cook rifle.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render with callouts showing the BML-G2/P19SPL-12 and SB-033M Morley weapons.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG close-ups of the 3mm joints used for shoulder and left-arm weapons.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth weapons laid out on a blue panel: rifle, shoulder pack, two chainsaw versions and joint parts.
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth official CG render shown beside the separately sold RaD CC-2000 Orbiter for comparison.

Bandai 30MM ARMORED CORE VI FIRES OF RUBICON RaD CC-3000 Wrecker Milk Tooth

$64.99 AUD
Bandai 30MM Armored Core VI RaD CC-3000 Wrecker Milk Tooth, piloted by "Honest" Brute. Four weapons including a chainsaw in retracted and released versions, built from head, core, arms and legs.
In stock
From $10
4 × $16.24
PayPal Mastercard
Visa american-express
Google Pay Shop Pay
Key features

Four weapons: WB-0000 Bad Cook, WB-0010 Double Trouble, BML-G2/P19SPL-12 and SB-033M Morley.

Chainsaw in two states: the WB-0010 Double Trouble is supplied in retracted and released versions.

3mm joints: used for attaching shoulder weapons and some of the weapons used on the left arm.

Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 30MM ARMORED CORE VI FIRES OF RUBICON RaD CC-3000 Wrecker Milk Tooth

Bandai 30MM Armored Core VI Fires of Rubicon RaD CC-3000 Wrecker Milk Tooth

Milk Tooth is the RaD CC-3000 Wrecker piloted by "Honest" Brute in Armored Core VI: Fires of Rubicon, and this kit brings it into Bandai's 30 Minutes Missions range as a figure built around simple assembly and customisation. Bandai states the head, core, arms and legs use the structures shared throughout the series, so it goes together much like assembling a mech in the game. It comes with four weapons, including a chainsaw that is supplied in both retracted and released versions. Bandai rates it 8+.

Technical Highlights

  • Series-shared structure: head, core, arms and legs each use the structures shared throughout the 30MM line.
  • 3mm joints: used for attaching both shoulder weapons and some of the weapons used on the left arm.
  • Chainsaw in two states: the WB-0010 Double Trouble comes in retracted and released variations.

What Makes This Kit Special

  • Four weapons: WB-0000 Bad Cook, WB-0010 Double Trouble, BML-G2/P19SPL-12 and SB-033M Morley.
  • Game-style assembly: built from head, core, arms and legs, as in the game.
  • Customisable: the 3mm joints take shoulder and left-arm weapons in various combinations.

What's In The Box

  • Milk Tooth figure
  • WB-0000 Bad Cook (1)
  • WB-0010 Double Trouble (1)
  • BML-G2/P19SPL-12 (1)
  • SB-033M Morley (1)
  • Joint parts (1 set)
  • Sticker sheet (1)

Build Your Armored Core Collection

Pair Milk Tooth with:

Build Specifications

Line: 30 Minutes Missions (30MM), Armored Core VI Fires of Rubicon
Model: RaD CC-3000 Wrecker Milk Tooth
Manufacturer: Bandai Spirits
Recommended age: 8+ (Bandai)
Retail box size and weight: 30 x 19 x 10 cm, 530 g
Barcode: 4573102685759

Perfect For

Armored Core VI fans who want Milk Tooth, piloted by "Honest" Brute, on the shelf. 30MM builders who like heavy weapons and a chainsaw in retracted and released versions.

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink. Genuine Australian stock in hand, not ordered through an overseas proxy.

Build Notes

This is a plastic model kit that needs assembly, rated 8+ by Bandai.

Last updated: 16 October 2026 (AEST)

Bandai 30 Minutes Missions

Some nights you don't have a full Gundam build in you. 30 Minutes Missions is Bandai's answer to that. These mecha kits built to go together in about half an hour, with no glue, no paint and no pressure. Sit down, snip a few parts, and have something finished on...

Read More
Bandai 30 Minutes Missions

Assembly Guide

SKILL LEVEL REQUIRED
Skill Level.2 Basic modeling skills are required. Parental supervision may be required for younger children. These kits are generally suitable for beginner builders. A basic set of modeling tools are required including nippers, hobby knife, sanding sticks/paper, file, and tweezers. No glue is needed for the general assembly. Parts will need to be removed by using a pair of nippers and cutting the part away from the runner. Parts may require clean-up where they were removed from the runner.
No Cement Required

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

No Painting Required

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

What is in the box?

The Milk Tooth figure, WB-0000 Bad Cook, WB-0010 Double Trouble, BML-G2/P19SPL-12, SB-033M Morley, one set of joint parts and a sticker sheet.

What are the 3mm joints for?

Bandai states they are used for attaching both shoulder weapons and some of the weapons used on the left arm.

Does the chainsaw come in more than one state?

Yes. The WB-0010 Double Trouble chainsaw comes in retracted and released variations.

What age is it rated for?

Bandai rates it for ages 8 and over.

Who pilots Milk Tooth?

Bandai names "Honest" Brute as the pilot of the RaD CC-3000 Wrecker Milk Tooth in Armored Core VI: Fires of Rubicon.

know more

Let customers speak for us

from 1089 reviews
Gundam Base Limited 1/144 HG Geara Doga (Axis Shock Image Color)
David McMaugh
Cool model kit Geara Doga

I haven't got around to building it yet but it looks cool. Really fast shipping, it felt like it was in my hands straight after I pressed buy. Great shop, will buy again

Gundam Base Limited 1/144 HG Geara Doga (Axis Shock Image Color)
Bandai 1/100 MG Astray Red Frame Kai
Patrick Saint

Bandai 1/100 MG Astray Red Frame Kai

Bandai 1/100 MG Astray Red Frame Kai
Anonymous

Great present for a friend and a good starting point!

Mecha Express Australia
Bandai HG 1/144 White Gundam - GQuuuuuuX Series
Leah Chandler-Dady
QMHE

Great to catch up with Cam and Amanda, always a wonderful store to visit and buy from

Bandai HG 1/144 White Gundam - GQuuuuuuX Series
Perry
Zoids AZ-07

Quick response and fast delivery! A++

Mecha Express Australia
Bandai 1/100 MG GF13-017NJ Shining Gundam
Julie Allan
Amazing Build, my Grandson loved it!

I purchased this kit and one other for my grandsons birthday. He loved building it and found it easy to follow. My order arrived in super fast time and was beautifully packed. It even had some wonderful freebies in the box which was really great. Excellent product and service in every way!

Bandai 1/100 MG GF13-017NJ Shining Gundam
Bandai 1/100 MG GF13-001NHII Master Gundam
Julie Allan
These are fantastic kits.

I purchased this for my grandson on his birthday. He has already put it together and everything fits perfectly. Both he and I are chuffed! Thank you!

Bandai 1/100 MG GF13-001NHII Master Gundam
Anonymous
Mystery box

Great selection of kit, excellent value for money

Mecha Express Australia
William P
MGEX Strike Freedom Golden Week deal

Awesome kit, great extras. Only criticism is that the kit comes with a base so you don't need the second one. The kit also doesn't have the ability to take the blue LED bonus so if you don't have another use for it it is wasted. Luckily, I'm a Gundam tragic so will always have uses for extra bases and lighting kits.

Mecha Express Australia
Anonymous
Great service

When I notified them some items were missing from my order they sent replacements without any charge. Very reliable

Mecha Express Australia
Bandai 30MM ARMORED CORE VI FIRES OF RUBICON Balam Industries BD-011 Melander
Cam Wedgwood
A great model from a brilliant company!!

I loved this build, simple, fun and true to the Armored Core franchise. Once again, Cam was quick to send my order which arrived quickly and extremely well protected. (I even received a little something extra!). Once again, Mecha Express Australia surpassed my expectations!!

Bandai 30MM ARMORED CORE VI FIRES OF RUBICON Balam Industries BD-011 Melander
Liam :)
Great Store and Fast Delivery

Really impressed with my experience. The ordering process was simple and delivery was quick. I ordered on Tuesday and received my product on Thursday, only 2 days later and everything arrived in perfect condition.

Mecha Express Australia
Bandai 1/100 MG Gundam Barbatos Lupus
Ryan Martin

Everything was well packed, arrived promptly, and came with a postcard and part separator as a welcome gift. Very impressed.

Bandai 1/100 MG Gundam Barbatos Lupus
Bandai 1/1000 Earth Defense Hyuga Class Combat Cruiser DCV-01 Hyuga (Yamato)
Timothy Hsi
Excellent service and fast delivery

I purchased on 6 Jan and my order arrived on 13 Jan. It was very well packed, with both boxes in excellent condition. Cam even provided a small free gift in the box! Overall purchasing experience was smooth and hassle-free. I haven’t had the chance to build the kit yet, but based on the service and care taken with shipping, I would happily purchase from this store if there are other Space Battleship Yamato models available.

Bandai 1/1000 Earth Defense Hyuga Class Combat Cruiser DCV-01 Hyuga (Yamato)
P-Bandai MGSD Gundam Base Limited Gundam Barbatos (Iron-Blooded Electroplated Colour)
M. U.
Very rare with fair price

If you were one of the lucky ones that were able to travel to Sydney Gundam Base pop-up in 2025 and queued extremely early (like the first 40 or so) on the first day, probably you were able to grab one of these. Otherwise, the only alternative I would know of is traveling to Japan and being uber lucky of having it still being sold at Gundam bases. Otherwise, it's a second-hand market, and prices will go up. That said, the price was fair, I think it would be similar price as using a dropship service from Japan, with the exception that it's much faster and way more guaranteed you will get proper merchandise. So, Mecha Express, Cam, thank you so much for your store!

P-Bandai MGSD Gundam Base Limited Gundam Barbatos (Iron-Blooded Electroplated Colour)