Spend more to unlockfor FREE shipping.
LIGHTNING FAST SAME DAY DISPATCH FOR ORDERS PLACED PRIOR TO 2PM MONDAY - FRIDAY. 
Bandai 30MF Class Up Armor (Rosan Paladin) front view, official CG render of the Class III Rosan Paladin with horned black helmet, magenta shoulder wings, hip armour panels and an enlarged sword. Rosan Knight base figure sold separately.
Bandai 30MF Class Up Armor (Rosan Paladin) rear view, official CG render showing the back armour plates, magenta shoulder pieces and the Rosan Knight's shield mounted at the rear waist. Rosan Knight sold separately.
Bandai 30MF Class Up Armor (Rosan Paladin) retail box artwork, marked A-04 and age 15+, showing the Class III Rosan Paladin with the contents layout and the Class I Rosan Knight, sold separately, as the starting point.
Bandai 30MF Class Up Armor (Rosan Paladin) in a striding pose with the enlarged sword swung back, official CG render of the Paladin built on a Rosan Knight.
Bandai 30MF Class Up Armor (Rosan Paladin) kneeling with a shield raised and sword planted, official CG render of the Paladin built on a Rosan Knight.
Bandai 30MF Class Up Armor (Rosan Paladin) class-up diagram: this set at top left, combined with the Rosan Knight at bottom left (sold separately), produces the Rosan Paladin at right. Official CG images.
Bandai 30MF Class Up Armor (Rosan Paladin) included parts laid out on dark grey: horned helmet mask, two shoulder armours, two long hip armour panels, gauntlets, chest plates, leg guards and the sword-enlarging part. CG render.
Bandai 30MF Class Up Armor (Rosan Paladin) close-up of the horned black helmet with red eye and magenta chest ornament. Bandai's caption notes the face design and colouring differ from the Liber Paladin.
Bandai 30MF Class Up Armor (Rosan Paladin) front view, official CG render of the Class III Rosan Paladin with horned black helmet, magenta shoulder wings, hip armour panels and an enlarged sword. Rosan Knight base figure sold separately.
Bandai 30MF Class Up Armor (Rosan Paladin) rear view, official CG render showing the back armour plates, magenta shoulder pieces and the Rosan Knight's shield mounted at the rear waist. Rosan Knight sold separately.
Bandai 30MF Class Up Armor (Rosan Paladin) retail box artwork, marked A-04 and age 15+, showing the Class III Rosan Paladin with the contents layout and the Class I Rosan Knight, sold separately, as the starting point.
Bandai 30MF Class Up Armor (Rosan Paladin) in a striding pose with the enlarged sword swung back, official CG render of the Paladin built on a Rosan Knight.
Bandai 30MF Class Up Armor (Rosan Paladin) kneeling with a shield raised and sword planted, official CG render of the Paladin built on a Rosan Knight.
Bandai 30MF Class Up Armor (Rosan Paladin) class-up diagram: this set at top left, combined with the Rosan Knight at bottom left (sold separately), produces the Rosan Paladin at right. Official CG images.
Bandai 30MF Class Up Armor (Rosan Paladin) included parts laid out on dark grey: horned helmet mask, two shoulder armours, two long hip armour panels, gauntlets, chest plates, leg guards and the sword-enlarging part. CG render.
Bandai 30MF Class Up Armor (Rosan Paladin) close-up of the horned black helmet with red eye and magenta chest ornament. Bandai's caption notes the face design and colouring differ from the Liber Paladin.

Bandai 30MF Class Up Armour (Rozen Paladin)

$12.99 AUD
Class III upgrade set that turns the 30MF Rosan Knight (sold separately) into the horned black Rosan Paladin. New helmet mask, shoulder, gauntlet, hip and back armour plus a sword-enlarging part, moulded in black and purple. Snap-fit, no glue or paint. Rosan Knight not included.
Low stock - 1 available
From $10
4 × $3.24
PayPal Mastercard
Visa american-express
Google Pay Shop Pay
Key features
  1. Class III Rosan Paladin: turns the Rosan Knight (sold separately) into the Paladin job, per Bandai.
  2. New horned helmet mask: a full head swap with a different face design and colouring from the Liber Paladin.
  3. Sword-enlarging part: clamps onto the Rosan Knight's own sword to make it larger. The set has no standalone sword.
Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 30MF Class Up Armour (Rozen Paladin)

Class up your Rosan Knight into the horned black Paladin

This is Bandai's 30MF Class Up Armor (Rosan Paladin), item A-04 in the 30 Minutes Fantasy line, released in September 2024. It is an armour and armament set, not a standalone figure. Bandai's own copy says you combine it with the Rosan Knight (sold separately) to class up to the Rosan Paladin, a Class III job with higher sword skill and more physical defence than a knight. The face design and colouring differ from the Liber Republic's Paladin, which is sold separately, and Bandai's promotional images list the element core as fire. Some retailers spell the line "Rozen".

Build difficulty

Skill Level 2 on the Mecha Express scale. It is a short build: a Japanese reviewer counts 14 additional parts and says it is mostly a matter of cutting parts from the runners, since the set is made of swap-on armour pieces. Three runners are in the pack, two in near-black and one in purple. Bandai rates it for ages 15 and up. No glue is needed.

Technical highlights

  • Armour parts and armament parts, one set each, per Bandai's accessory list.
  • New helmet mask with side horns, replacing the Rosan Knight's head mask. Bandai describes it as a different face design and colouring from the Liber Paladin.
  • Shoulder, gauntlet, hip and back armour pieces, plus extra leg armour. One reviewer notes the gauntlets fit onto the sleeve parts and the hip armour reads like a skirt.
  • A sword-enlarging part. It clamps onto the Rosan Knight's own sword to make it larger, so the set does not contain a standalone sword.
  • Moulded in black and purple, so no painting is needed for the look shown on the box.

What makes this set special

  • Class III upgrade: Bandai positions it as the step above the knight, with the packaging labelling it Class III.
  • Dark, villain-leaning look: one reviewer describes a black-knight silhouette that reads as an aide to a demon lord rather than a polished court knight.
  • Face change: the helmet mask is a full replacement, so the head looks like a different design from the Rosan Knight.
  • Part of a modular line: the 3mm connection points on the 30MF figures let you try other class-up sets on the same Knight.

What's in the box

  • Armour parts, 1 set
  • Armament parts, 1 set (including the sword-enlarging part)

Not included: the Rosan Knight figure, its sword and shield, and any display base. The figure and weapons in Bandai's promotional images are CG renders of the combined build, and Bandai states that everything other than this set is sold separately.

Compatible kits

This set is made for the 30MF Rosan Knight. Bandai's packaging shows the Rosan Knight as the Class I starting point, with this set turning it into the Class III Rosan Paladin. The shield in the promotional images belongs to the Rosan Knight, and a reviewer notes it sits on the rear waist once the armour is fitted. A thread on r/30_Minutes_Missions discusses fitting it onto the Liber Knight instead, and one poster there did not feel the two combined well.

Build your 30MF collection

Currently in stock at Mecha Express: Bandai 30MF Rozen Knight, the base figure this set is built for, Bandai 30MF Class Up Armour (Rozen Holy Knight) and Bandai 30MF Class Up Armor (Rozen Viking) if you want to try a different class on the same Knight.

Build specifications

  • Line: 30 Minutes Fantasy (30MF), Class Up Armor A-04
  • Job: Rosan Paladin (Class III), class-up for the Rosan Knight
  • Release: September 2024 (Bandai)
  • Manufacturer: Bandai Spirits
  • Retail box weight: approx. 70 g (box approx. 29 x 21 x 2.2 cm)
  • Barcode: 4573102671790
  • Skill Level: 2 (Mecha Express rating)
  • Assembly: Snap-fit, nippers needed to remove parts, no glue
  • Paint required: No, parts are moulded in black and purple
  • Recommended age: 15 years and up (Bandai)

Perfect for

  • 30MF builders who already own a Rosan Knight and want a darker upgrade
  • Collectors building out the Rosan side of the Liber and Rosan pairings
  • Custom builders after large black armour pieces to mix with other sets
  • Anyone who wants a short, low-effort upgrade build

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink. Genuine Australian stock in hand, not ordered through an overseas proxy.

What to watch for

Drawing on two Japanese builder reviews (Shobby and Marumi99) and a community thread on r/30_Minutes_Missions. English-language coverage is thin, so treat these as individual notes:

  • This is an add-on only. You need the Rosan Knight to build the Paladin, and there is no standalone sword in the set. One reviewer said they wished a sword had been included.
  • The armour is large. One reviewer found it slightly reduces the lower-body range of motion, while upper-body movement was not affected and posing was fine.
  • The Rosan Knight's shield ends up on the rear waist, so the extra armour improves the sword rather than adding a new shield.
  • One community poster did not think the set combined well with the Liber Knight.

Build notes

No glue and no paint. A pair of nippers is needed to cut parts from the runner, and a hobby knife helps tidy any leftover gate marks. Suitable for ages 15 and up per Bandai.

Last updated: 14 October 2026 (AEST)

Bandai 30 Minutes Fantasy

The Bandai 30 Minutes Fantasy (30MF) collection takes model kits into the realm of fantasy, featuring knights, warriors, and mythical creatures. With highly detailed parts, easy snap-fit assembly, and exceptional articulation, these kits are accessible to both beginners and experienced builders. The series includes models like Liber Knight and Liber...

Read More
Bandai 30 Minutes Fantasy

Assembly Guide

SKILL LEVEL REQUIRED
Skill Level.2 Basic modeling skills are required. Parental supervision may be required for younger children. These kits are generally suitable for beginner builders. A basic set of modeling tools are required including nippers, hobby knife, sanding sticks/paper, file, and tweezers. No glue is needed for the general assembly. Parts will need to be removed by using a pair of nippers and cutting the part away from the runner. Parts may require clean-up where they were removed from the runner.
No Cement Required

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

No Painting Required

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

Do I need another kit to use this set?

Yes. It is a class-up set for the 30MF Rosan Knight, which is sold separately (Bandai). It is not a standalone figure.

What is in the box?

Armour parts and armament parts, one set each (Bandai). The armament parts include a part that enlarges the Rosan Knight's sword. There is no figure, shield or standalone sword.

Will it fit 30 Minutes Sisters figures?

It is made for the 30 Minutes Fantasy line, specifically the Rosan Knight. Bandai's packaging states it is a part for the 30 Minutes Fantasy series.

Does it need paint or glue?

No. The parts are moulded in black and purple and snap together. You will need nippers to cut the parts from the runner.

Does the big armour limit posing?

One Japanese reviewer found it slightly reduces lower-body movement because the armour is large, while upper-body posing was unaffected.

know more

Let customers speak for us

from 1089 reviews
Gundam Base Limited 1/144 HG Geara Doga (Axis Shock Image Color)
David McMaugh
Cool model kit Geara Doga

I haven't got around to building it yet but it looks cool. Really fast shipping, it felt like it was in my hands straight after I pressed buy. Great shop, will buy again

Gundam Base Limited 1/144 HG Geara Doga (Axis Shock Image Color)
Bandai 1/100 MG Astray Red Frame Kai
Patrick Saint

Bandai 1/100 MG Astray Red Frame Kai

Bandai 1/100 MG Astray Red Frame Kai
Anonymous

Great present for a friend and a good starting point!

Mecha Express Australia
Bandai HG 1/144 White Gundam - GQuuuuuuX Series
Leah Chandler-Dady
QMHE

Great to catch up with Cam and Amanda, always a wonderful store to visit and buy from

Bandai HG 1/144 White Gundam - GQuuuuuuX Series
Perry
Zoids AZ-07

Quick response and fast delivery! A++

Mecha Express Australia
Bandai 1/100 MG GF13-017NJ Shining Gundam
Julie Allan
Amazing Build, my Grandson loved it!

I purchased this kit and one other for my grandsons birthday. He loved building it and found it easy to follow. My order arrived in super fast time and was beautifully packed. It even had some wonderful freebies in the box which was really great. Excellent product and service in every way!

Bandai 1/100 MG GF13-017NJ Shining Gundam
Bandai 1/100 MG GF13-001NHII Master Gundam
Julie Allan
These are fantastic kits.

I purchased this for my grandson on his birthday. He has already put it together and everything fits perfectly. Both he and I are chuffed! Thank you!

Bandai 1/100 MG GF13-001NHII Master Gundam
Anonymous
Mystery box

Great selection of kit, excellent value for money

Mecha Express Australia
William P
MGEX Strike Freedom Golden Week deal

Awesome kit, great extras. Only criticism is that the kit comes with a base so you don't need the second one. The kit also doesn't have the ability to take the blue LED bonus so if you don't have another use for it it is wasted. Luckily, I'm a Gundam tragic so will always have uses for extra bases and lighting kits.

Mecha Express Australia
Anonymous
Great service

When I notified them some items were missing from my order they sent replacements without any charge. Very reliable

Mecha Express Australia
Bandai 30MM ARMORED CORE VI FIRES OF RUBICON Balam Industries BD-011 Melander
Cam Wedgwood
A great model from a brilliant company!!

I loved this build, simple, fun and true to the Armored Core franchise. Once again, Cam was quick to send my order which arrived quickly and extremely well protected. (I even received a little something extra!). Once again, Mecha Express Australia surpassed my expectations!!

Bandai 30MM ARMORED CORE VI FIRES OF RUBICON Balam Industries BD-011 Melander
Liam :)
Great Store and Fast Delivery

Really impressed with my experience. The ordering process was simple and delivery was quick. I ordered on Tuesday and received my product on Thursday, only 2 days later and everything arrived in perfect condition.

Mecha Express Australia
Bandai 1/100 MG Gundam Barbatos Lupus
Ryan Martin

Everything was well packed, arrived promptly, and came with a postcard and part separator as a welcome gift. Very impressed.

Bandai 1/100 MG Gundam Barbatos Lupus
Bandai 1/1000 Earth Defense Hyuga Class Combat Cruiser DCV-01 Hyuga (Yamato)
Timothy Hsi
Excellent service and fast delivery

I purchased on 6 Jan and my order arrived on 13 Jan. It was very well packed, with both boxes in excellent condition. Cam even provided a small free gift in the box! Overall purchasing experience was smooth and hassle-free. I haven’t had the chance to build the kit yet, but based on the service and care taken with shipping, I would happily purchase from this store if there are other Space Battleship Yamato models available.

Bandai 1/1000 Earth Defense Hyuga Class Combat Cruiser DCV-01 Hyuga (Yamato)
P-Bandai MGSD Gundam Base Limited Gundam Barbatos (Iron-Blooded Electroplated Colour)
M. U.
Very rare with fair price

If you were one of the lucky ones that were able to travel to Sydney Gundam Base pop-up in 2025 and queued extremely early (like the first 40 or so) on the first day, probably you were able to grab one of these. Otherwise, the only alternative I would know of is traveling to Japan and being uber lucky of having it still being sold at Gundam bases. Otherwise, it's a second-hand market, and prices will go up. That said, the price was fair, I think it would be similar price as using a dropship service from Japan, with the exception that it's much faster and way more guaranteed you will get proper merchandise. So, Mecha Express, Cam, thank you so much for your store!

P-Bandai MGSD Gundam Base Limited Gundam Barbatos (Iron-Blooded Electroplated Colour)