Spend more to unlockfor FREE shipping.
LIGHTNING FAST SAME DAY DISPATCH FOR ORDERS PLACED PRIOR TO 2PM MONDAY - FRIDAY. 

Bandai 30MF Class Up Armor (Liber Enchanter)

$13.99 AUD
Armour and weapon set that turns a 30MF Liber Wizard (sold separately) into the ice-element Liber Enchanter. Adds a mask-like head part, curved shoulder armour, a purple cape and a straight sword. Snap-fit, so no glue is needed.
Low stock - 1 available
From $10
4 × $3.49
Key features

Armor Cross class-up: swaps onto a 30MF Liber Wizard (sold separately) to make a Liber Enchanter.

Cape and sword: a mask-like head part, curved shoulder armour, a purple cape and a straight sword.

Ice Element Core: a different face design and colouring from the Rosan Enchanter set.

Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 30MF Class Up Armor (Liber Enchanter)

Class up a Liber Wizard into an Enchanter

The 30MF Class Up Armor (Liber Enchanter) is an armour and weapon set that goes onto a 30MF Liber Wizard (sold separately) and turns it into a Liber Enchanter. It adds a mask-like head part, curved shoulder armour, a purple cape and a straight sword, and Bandai gives it an ice Element Core.

It is not a standalone figure. You need the Liber Wizard body underneath, and the armour does the rest.

Build difficulty

A snap-fit armour set, so no glue is needed. Bandai rates it 15+ on the box. Bring a pair of nippers and a hobby knife or sanding stick if you like to clean up the nub marks. Bandai's product page does not list a part count or build time, so I won't guess at one.

Technical highlights

Bandai calls the system Armor Cross: you swap the armour over the base figure to class up to a higher job. This set is the Enchanter job for the Liber Wizard. Bandai's contents are a sword, a set of armour parts and a set of weapon parts. In the sample photos the Enchanter carries the sword in one hand and a shortened staff in the other.

What makes this kit special

  • Armor Cross class-up: swaps onto a Liber Wizard to make a Liber Enchanter.
  • Ice Element Core: the Liber Enchanter's element is ice.
  • Mask-like head part: a different face design and colouring from the Rosan Enchanter set.
  • Curved shoulder armour: two curved shoulder shells and a chest plate come with the set.
  • Purple cape: a full cape piece with its own collar part.
  • Straight sword: a long, straight blade for display poses.

What's in the set

  • Sword x1
  • Armour parts x1 set
  • Weapon parts x1 set

Everything else in the photos, including the Liber Wizard body, is sold separately.

Compatible kits

Bandai's pairing for this set is the 30MF Liber Wizard (sold separately). Bandai describes combining the two as the way to class up to the Liber Enchanter.

Build your 30MF collection

Build specifications

  • Line: 30 Minutes Fantasy (30MF), Class Up Armor A-14
  • Class: Enchanter
  • Element Core: Ice
  • Requires: 30MF Liber Wizard (sold separately)
  • Manufacturer: Bandai Spirits
  • Release: July 2025 (Japan)
  • Retail pack: 28 x 19 x 2 cm, 60 g (the set as sold)
  • Recommended age: 15+
  • Assembly: snap-fit, no glue
  • Barcode: 4573102686817

Perfect for

  • Liber Wizard owners who want to class up to the Enchanter job
  • 30MF collectors building out their class-up armour roster
  • Builders who like a cape and a long sword for display poses

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink. Genuine Australian stock in hand, not ordered through an overseas proxy.

What to watch for

Written review coverage of this specific set is thin, so this section is mostly about what you are buying rather than faults.

  • Needs a Liber Wizard: the set is armour only. The body, and the blue-gem staff in the sample photos, are not in the box.
  • Sample photos are painted: Bandai's box note says the finished model pictured is painted, so the finish in the sample photos may look different from the parts as moulded.
  • Cross-fit is unconfirmed: some builders on r/30MF_30MinutesFantasy say class-up sets swap within the same class across Liber and Rosan but not fully across different silhouettes. Bandai pairs this set with the Liber Wizard, so that is the pairing to buy for.

Build notes

Snap-fit, no glue. Bring a pair of nippers. Recommended age 15+. Bandai's product page does not list a build time.

Last updated: 14 October 2026 (AEST)

Bandai 30 Minutes Fantasy

The Bandai 30 Minutes Fantasy (30MF) collection takes model kits into the realm of fantasy, featuring knights, warriors, and mythical creatures. With highly detailed parts, easy snap-fit assembly, and exceptional articulation, these kits are accessible to both beginners and experienced builders. The series includes models like Liber Knight and Liber...

Read More
Bandai 30 Minutes Fantasy

Assembly Guide

Skill Level.2 Basic modeling skills are required. Parental supervision may be required for younger children. These kits are generally suitable for beginner builders. A basic set of modeling tools are required including nippers, hobby knife, sanding sticks/paper, file, and tweezers. No glue is needed for the general assembly. Parts will need to be removed by using a pair of nippers and cutting the part away from the runner. Parts may require clean-up where they were removed from the runner.

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

Does this come with a figure?

No. It is an armour and weapon set only. Bandai pairs it with the 30MF Liber Wizard, which is sold separately.

What is in the set?

One sword, one set of armour parts and one set of weapon parts, per Bandai. Everything else shown in the photos, including the body, is sold separately.

Do I need glue or paint?

No glue, it is snap-fit. Bring nippers. Bandai notes the finished model pictured on the box is painted, so painted finishes in the sample photos may look different from the parts as moulded.

Will it fit a Rosan Wizard?

Bandai pairs this set with the Liber Wizard. Some builders report class-up sets swap within the same class across Liber and Rosan but not fully across different silhouettes. Bandai does not confirm cross-fit, so the Liber Wizard is the safe pairing.

How is it different from the Rosan Enchanter?

Bandai gives the Liber Enchanter an ice Element Core and a different face design and colouring from the Rosan Enchanter, whose Element Core is lightning.