OZ's workhorse Leo, the grunt suit of Gundam Wing
The Bandai 1/144 HGAC Leo is the OZ-06MS Leo, the mass-produced mobile suit that fills the ranks of OZ and the Alliance in Mobile Suit Gundam Wing. It is the suit the Gundam pilots cut through in almost every battle, which makes it the classic grunt to stand behind your Wing Gundams.
Bandai released it in May 2018 as the fourth kit in the Gunpla Evolution Project, and it was the first time the Leo got a High Grade kit. It suits Gundam Wing fans, anyone building an army of grunts, and newer builders after a quick, low-cost kit.
Build difficulty
This is a snap-fit High Grade with no glue and no stickers. Bandai rates it for ages 8 and over, the runners are grouped by body part and the manual uses icons, so it goes together quickly; one reviewer built it in about an hour. The olive green plastic shows nub marks, so take a little care with clean-up, and one reviewer found some joints loose, so it is not the most forgiving kit for posing.
Technical highlights
The kit is moulded in six colours with no stickers at all. The head camera is a clear yellow part. Bandai designed a new joint structure for the Evolution Project, and the joints can be fitted after the outer parts, which makes painting easier. The knees bend in two stages, and one reviewer found the footing good enough for a one-leg kick pose. The head is fixed, as in the design, so it does not turn. The 105mm rifle can be held in both hands, and the shield mounts on the shoulder once the shoulder armour is removed.
What makes this kit special
-
No stickers: six colours moulded in, plus a clear yellow head camera, so it looks finished straight off the runners.
-
Quick build: runners grouped by body part and an icon manual make it a fast build.
-
Paint-friendly joints: the joints fit in after the outer parts, so you can paint the armour separately.
-
105mm rifle: the Leo's drum-fed rifle, built for a two-handed hold.
-
Shoulder shield: the round shield mounts on the shoulder, and the two beam saber hilts store on its back.
-
Army builder: a simple, low-cost kit that suits building a squad of Leos.
What's in the box
- 5 plastic runners
- Instruction manual
- 105mm rifle
- Shield
- 2 beam sabers
Compatible accessories
No display base is included with the kit. For dynamic poses, pair the Bandai 1/144 HGAC Leo with the Bandai Action Base 2 - Display Stand for 1/144 Scale Gunpla, the standard 1/144 display stand, sold separately.
Build your Gundam Wing collection
Build specifications
-
Series: Mobile Suit Gundam Wing
-
Grade: High Grade After Colony (HGAC)
-
Scale: 1/144
-
Mobile suit: OZ-06MS Leo
-
Faction: OZ
-
Manufacturer: Bandai
-
First released: May 2018 (Gunpla Evolution Project No. 4)
-
Retail box weight: 220 g, retail box approx. 30 x 19 x 4.7 cm
-
Barcode: 4573102591708
-
Skill level: 2 (Bandai age rating 8+)
-
Assembly method: snap-fit, no glue
-
Paint required: No
-
Special features: no stickers, clear yellow head camera, paint-friendly joints, saber hilts stored on the shield
Perfect for
- Gundam Wing fans who want OZ's grunt suit next to the Gundams.
- Builders putting together a squad or diorama of mass-produced suits.
- Newer builders after a quick, sticker-free kit.
- Painters, thanks to the joints that fit in after the armour.
- Collectors growing a High Grade shelf.
Fast Australian shipping
Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink.
The Bandai 1/144 HGAC Leo comes with its 105mm rifle, shield and two beam sabers.
What to watch for
Drawing on builder reviews (a Japanese build blog, a build gallery and a YouTube review):
-
Fixed head: three reviewers note the head does not move. That matches the design, but it limits head-turn poses.
-
Nub marks: two reviewers found gate marks show on the green plastic, so cut a little away from the part and clean up with a knife or file.
-
Beam saber hilts: two reviewers warn the hilts are easy to break, one at the connector tip and one when pulling them off the shield.
-
Ankle armour: one reviewer found the ankle armour kept popping off.
-
Loose joints: one reviewer found the hips and some ball joints loose during posing.
-
Short beam sabers: the beam blades are shorter than the usual Gundam sabers.
Builder tips: take the beam saber hilts off the shield gently. A dab of glue on the ankle armour keeps it in place. If you paint, one reviewer suggests grey around the head camera, the small chest detail and the rifle grip and sight.
Build notes
No glue needed for assembly. Nippers, a sharp hobby knife and a file or sanding stick for the nub marks cover the build. Painting is optional, since the colours are moulded in and there are no stickers.
Last updated: 13 November 2026 (AEST)