🚚 Spend more to unlock FREE shipping.
Same Day Dispatch For All Orders Placed Before 2pm AEST Mon-Fri (Excl Public Hols). Need Assistance Call Cam 0417617191.

Bandai 1/144 30MM Option Parts Set 20 (Full Armor Unit 1)

$20.99 AUD
Armored upgrade! 30MM Option Parts Set 20: 1/144 full armor. Customize mecha with tactical parts. Gunpla build enhanced!
From $10
4 × $5.24
Key features

Full armour bulk-out: intermediate armour panels and a pair of large weapons for a heavier, full-armour configuration.

Built for the Full Armor Alto and Igurite 01: but the parts attach to other compatible 30MM units too.

Grey-based colour, snap-fit: no cement or paint needed.

Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 1/144 30MM Option Parts Set 20 (Full Armor Unit 1)

Full Armor Unit 1, Option Parts Set 20 for the 30MM line

Option Parts Set 20 carries the weapons and armour from the 30MM 1/144 eEXM-17FA Full Armor Alto, built as a grey-based add-on set for the wider 30 Minutes Missions range. It was designed for the Alto and the newer Igurite 01, but the parts aren't locked to either kit.

The set adds intermediate armour panels and a pair of large weapons, bulking a standard 30MM unit out into a heavier, full-armour configuration. It's a snap-fit set. No cement or paint is required.

What's in the box

  • Backpack/armour set: one
  • Cannon blade: two
  • Joint parts set: one

Compatible kits

Full Armor Unit 1 was built for the 30MM eEXM-17FA Full Armor Alto and the Igurite 01, though Bandai's own listing notes the parts attach to other 30MM units too, so you can use it to bulk out any compatible kit in the line. Check the connection points on your own 30MM kit before ordering if you're after an exact fit. No display base is included with the set.

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink.

Last updated: 4 August 2026 (AEST)

Bandai 30 Minutes Missions

Some nights you don't have a full Gundam build in you. 30 Minutes Missions is Bandai's answer to that. These mecha kits built to go together in about half an hour, with no glue, no paint and no pressure. Sit down, snip a few parts, and have something finished on...

Read More
Bandai 30 Minutes Missions

Assembly Guide

Skill Level.1. Most adults & children can assemble Skill Level 1 kits with little to no difficulty. Very basic hobby tools are recommended including a pair of nippers, a hobby knife, but are not essential. No Glue is needed for these kits. Kits are all snap together build and most parts can be removed by twisting and pushing without the need to snip with nippers.

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

Is this set compatible with all 1/144 30MM kits?

Yes, the 1/144 30MM Option Parts Set 20 is designed to be compatible with the entire range of 1/144 30 Minutes Missions kits. The connection points are standardized, allowing for seamless customization.

Does this set require any glue or special tools for assembly?

No, the 30MM line is known for its snap-fit design. This set does not require glue. You'll only need a pair of nippers or hobby clippers to remove the parts from the runners cleanly.

How much additional armor and weaponry does this set add to my model?

The Option Parts Set 20 significantly enhances your model's armor. It includes a full set of heavy armor plates for the torso, limbs, and shoulders, as well as additional hardpoints for mounting extra weapons. The exact amount of weaponry depends on how you choose to configure your model, but it provides a substantial upgrade.

Are the parts pre-painted, or do I need to paint them myself?

The parts come molded in their base colors, which are typically designed to match the existing 30MM kits. However, they are not pre-painted with intricate details. If you desire a more customized look, you can paint and weather the parts to your liking.

Does this set limit the poseability of my 30MM model after the armor is attached?

While the added armor does increase the bulk of the model, the 30MM line is engineered to maintain a good range of motion. The design takes poseability into account, so you can still achieve dynamic poses. Some extreme poses might be slightly limited, but overall, the poseability remains excellent.