🚚 Spend more to unlock FREE shipping.
Same Day Dispatch For All Orders Placed Before 2pm AEST Mon-Fri (Excl Public Hols). Need Assistance Call Cam 0417617191.

Bandai 1/144 30MM Option Parts Set 17 (Wing Unit 1)

$15.99 AUD
A modular wing pack for the 30 Minutes Missions line, with fully movable joints for hover, glide or folded-in poses. Snap-fit assembly, no cement or paint needed. Works with a wide range of 30MM figures via the included connectors.
From $10
4 × $3.99
Key features

Modular Wings for Soaring Supremacy: Customize Flight & Dominate the Skies: The 1/144 30MM Option Parts Set 17 (Wing Unit 1) features the crown jewel – modular wings! This innovative design allows you to adjust the wing configuration for a variety of flight styles. Imagine your mecha soaring majestically with fully extended wings, or unleashing a surprise attack with compact wings for high maneuverability. This customization freedom grants you ultimate control over your mecha's aerial dominance!

Dynamic Posing & Expressive Storytelling: Take Flight & Breathe Life into Your Mecha: These aren't just decorative wings! The Wing Unit boasts high articulation points, allowing you to pose your mecha in dynamic and expressive flying maneuvers. Recreate aerial dogfights, showcase daring maneuvers, or capture your mecha gracefully gliding through the clouds. The Wing Unit 1 goes beyond functionality, inspiring creative storytelling and bringing your mecha customization to a whole new level.

Snap-Fit Assembly & Seamless Integration: Effortless Build for Soaring Adventures: Focus on the excitement of flight, not a complicated build process! The Wing Unit 1 is designed for a smooth and enjoyable experience. The parts utilize a convenient snap-fit assembly system, eliminating the need for glue or messy tools. Additionally, the included joints ensure seamless integration with most 30 Minutes Missions model kits. This makes the Wing Unit 1 a versatile addition to your collection, allowing you to easily equip any of your existing mecha for aerial combat.

Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 1/144 30MM Option Parts Set 17 (Wing Unit 1)

Give your 30MM a set of wings

The 30MM Option Parts Set 17 (Wing Unit 1) is a modular wing pack for the 30 Minutes Missions line. Every connection point moves, so you can angle the wings for a hover pose, a full glide, or fold them in tight for a more compact silhouette. The included joint parts let you mount it to a wide range of 30MM figures.

Moulded in white plastic, snap-fit, no cement and no paint needed. Recommended for builders 15 and up.

What's in the box

  • Wing unit: the full modular wing assembly, split into left and right sides plus a centre mount.
  • Joint parts (x2): connectors that attach the wing unit to your 30MM figure's back mount.

Compatible kits

Designed for the 30 Minutes Missions (30MM) line generally, using the standard 30MM back-mount connection. The wing unit can also be split apart and used as individual customisation parts rather than one fixed set.

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink.

Last updated: 4 August 2026 (AEST)

Bandai 30 Minutes Missions

Some nights you don't have a full Gundam build in you. 30 Minutes Missions is Bandai's answer to that. These mecha kits built to go together in about half an hour, with no glue, no paint and no pressure. Sit down, snip a few parts, and have something finished on...

Read More
Bandai 30 Minutes Missions

Assembly Guide

Skill Level.1. Most adults & children can assemble Skill Level 1 kits with little to no difficulty. Very basic hobby tools are recommended including a pair of nippers, a hobby knife, but are not essential. No Glue is needed for these kits. Kits are all snap together build and most parts can be removed by twisting and pushing without the need to snip with nippers.

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

This Wing Unit looks awesome! Will it work with all my 30 Minutes Missions models?

It boasts great compatibility! This Wing Unit 1 is designed to work seamlessly with most 30 Minutes Missions model kits. This allows you to transform any of your existing mecha warriors into aerial aces, dominating the battlefield from above.

I see it has adjustable wings. Can I pose the mecha in different flying positions?

Absolutely! The Wing Unit boasts a modular design, allowing you to adjust the wing configuration for various flight styles. Additionally, the wings themselves are highly articulated. This lets you pose your mecha in dynamic flying maneuvers, recreating epic aerial battles or showcasing their aerial prowess in breathtaking displays.

This sounds cool, but is it difficult to put together? I'm not a model building expert.

Not at all! This set is designed for a smooth and enjoyable building experience. The parts utilize a convenient snap-fit assembly system, eliminating the need for glue or messy tools. Focus on the excitement of creating a flying mecha and let the snap-fit system handle the technical aspects.

Does this Wing Unit come with any additional parts besides the wings?

The Wing Unit 1 might include extras! While the focus is on the wings, it's always a good idea to check the product description for any additional parts or accessories that might be included. This way, you get the full picture of what you're adding to your mecha customization arsenal.

Can I use this Wing Unit with any other action figure stands besides the Action Base 7?

The Action Base 7 might be recommended for optimal posing, but other options exist! The Wing Unit utilizes standard connection points, making it potentially compatible with various action figure stands as long as they have compatible ports or adapters. It's always a good idea to check the size and connection points of your existing stands to ensure compatibility.