Exia's heavy-armour upgrade from Gundam 00V, in Master Grade
The Bandai 1/100 MG Gundam Avalanche Exia Dash is the GN-001/hs-A01D, Gundam Exia fitted with the Avalanche armour and the big Dash units from the side story Mobile Suit Gundam 00V: Battlefield Record. It is built on the MG Gundam Exia, with the Avalanche and Dash units newly sculpted for this kit.
Bandai first released it in 2018 through Premium Bandai in Japan. It suits Gundam 00 fans who want a very different Exia on the shelf, collectors of Celestial Being's Gundams and builders who enjoy a big, busy display piece.
Build difficulty
This is a Master Grade with no glue needed, but it is a long build with a lot of small parts. The small yellow details all over the armour are separate parts, so there is plenty to cut and clean. The Exia underneath shares its frame with the MG Gundam Exia. It suits builders with a few kits behind them more than a first-time builder.
Technical highlights
Colour comes from moulded plastic, with the many small yellow details as separate parts. The GN condensers are clear parts and the cables are soft hologram-finish parts. Foil stickers, dry-transfer decals, marking stickers and water-slide decals are all included. The shoulder and leg Dash units extend for high-mobility mode, and the leg units can be set under the feet with the GN verniers deployed for the high-speed movement mode. The GN claws at the tips of the Dash units open and close and take beam blades. The cockpit opens, the GN Drive can be removed and shown on its own stand, and swap parts let you build the plain Gundam Avalanche Exia without the Dash units.
What makes this kit special
-
Two suits in one box: build the full Avalanche Exia Dash, or swap leg parts to build the Gundam Avalanche Exia.
-
Transforming Dash units: extend them for high-mobility mode, or drop the leg units under the feet for the high-speed movement mode.
-
Opening GN claws: the claw tips of the Dash units open and close, and take beam blades for close-range poses.
-
Seven blades: GN Sword Kai, GN Long Blade, GN Short Blade, two GN Beam Daggers and two GN Beam Sabers, plus the GN Shield.
-
Back-mounted weapon storage: the GN Sword, both GN blades and the shield can be stored on the back.
-
Display stand included: a clear green display base comes in the box.
-
MG Exia detail: clear GN condensers, an opening cockpit and a removable GN Drive with its own stand.
What's in the box
- Plastic runners, including the newly sculpted Avalanche and Dash unit parts
- Parts to build the Gundam Avalanche Exia without the Dash units
- GN Sword Kai
- GN Long Blade and GN Short Blade
- Two GN Beam Daggers and two GN Beam Sabers
- GN Shield
- Weapon joints for back storage
- GN Drive display stand
- Setsuna F. Seiei figure and Karel figure
- Clear green display base with stand joint
- Foil stickers, dry-transfer decals, marking stickers and water-slide decals
- Instruction manual
Compatible accessories
A display base is already included, so no extra stand is needed for flying poses.
Build your Gundam 00 collection
Build specifications
-
Series: Mobile Suit Gundam 00V: Battlefield Record
-
Grade: Master Grade (MG)
-
Scale: 1/100
-
Mobile suit: GN-001/hs-A01D Gundam Avalanche Exia Dash
-
Faction: Celestial Being
-
Manufacturer: Bandai
-
First released: 2018 (Premium Bandai, Japan)
-
Retail box weight: 1,040 g, retail box approx. 39 x 31 x 11 cm
-
Barcode: 4573102635310
-
Skill level: 3 (Bandai age rating 15+)
-
Assembly method: snap-fit, no glue
-
Paint required: No
-
Materials: PS, ABS, PE and EVAC
-
Special features: transforming Dash units, opening GN claws, Avalanche Exia build option, display base included
Perfect for
- Gundam 00 fans who want the 00V side-story Exia on the shelf.
- Owners of the MG 00 Qan[T] or MG 00 Raiser lining up Celestial Being's Gundams.
- Builders who enjoy a long Master Grade build with lots of detail parts.
- Collectors after a kit that first came out as a Premium Bandai release in Japan.
- Anyone growing a Master Grade display shelf.
Fast Australian shipping
Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink.
The Bandai 1/100 MG Gundam Avalanche Exia Dash comes with its seven blades, GN Shield, two pilot figures and a clear green display base.
What to watch for
Drawing on builder reviews (Dalong.net, Japanese hobby blogs and YouTube build reviews):
-
Raising the arms: two reviewers found the springy hologram cable pushes the arms back down, and one adds the shoulder joints feel weak when raising the arms high. Tightening the shoulder joints as you build is worth trying.
-
Heavy Dash units: one Japanese reviewer found the hip joints sag under the weight of the leg Dash units and suggests tightening them.
-
Knee movement: the same reviewer notes the leg Dash units get in the way of the knees unless they are moved aside.
-
Torso articulation: one YouTube reviewer found posing limited by the torso articulation.
-
Loose parts: one YouTube reviewer had small parts come off while handling and glued the loose ones.
Builder tips: test the hips and shoulders as you build and tighten any loose joints before adding the Dash units. Use the included display base for flying poses so the legs are not carrying all the weight.
Build notes
No glue needed for assembly. A pair of nippers, a hobby knife, sanding sticks and tweezers will cover it, and decal softener helps with the water-slide decals. Painting is optional, since the colours are moulded in. Bandai rates it for ages 15 and over.
Last updated: 12 November 2026 (AEST)