🚚 Spend more to unlock FREE shipping.
Same Day Dispatch For All Orders Placed Before 2pm AEST Mon-Fri (Excl Public Hols). Need Assistance Call Cam 0417617191.

1 review

Bandai 1/100 MG XXXG-01W Wing Gundam Ver.Ka

$69.99 AUD
Embrace Katoki-refined Wing Gundam's enhanced articulation, Twin Buster Rifles, and foil seals. Gundam masterpiece.
Low stock - 1 available
From $10
4 × $17.49
Key features
  1. Katoki's Refined Design and Artistic Interpretation: Embrace the Wing Gundam's captivating design, meticulously crafted with renowned mecha designer Hajime Katoki's artistic vision as inspiration. Witness the blend of sharp lines, intricate paneling, and overall aesthetic that elevates this iconic mobile suit to new heights of elegance and power.
  2. Enhanced Articulation for Dynamic Poses: Experience superior posability with the Wing Gundam's enhanced articulation, allowing you to recreate iconic scenes from the anime or create your own captivating action sequences. Unleash a wider range of motion and flexibility, showcasing the Wing's graceful movements and formidable combat capabilities with unmatched realism.
  3. Formidable Weaponry and Signature Armaments: Command the battlefield with the Wing Gundam's formidable arsenal, including its signature Twin Buster Rifles, capable of devastating energy blasts. Wield the Beam Sabers for close-quarters combat and utilize the shield for defense, replicating the Wing's versatility and strategic dominance on the battlefield.
Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@gundamexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 1/100 MG XXXG-01W Wing Gundam Ver.Ka

Bandai MG 1/100 XXXG-01W Wing Gundam Ver.Ka

The MG 1/100 XXXG-01W Wing Gundam Ver.Ka is Hajime Katoki's definitive redesign of Heero Yuy's iconic mobile suit, sitting at the intersection of the original TV series design and the Endless Waltz aesthetic. Katoki created this Ver.Ka treatment as part of his redesign of all five original Gundam Wing suits, and the result is something genuinely unique. Wing Gundam retains the sturdier, straighter wings and full bird mode transformation of the original TV design, while borrowing the more refined, elegant proportions and surface detail language from Wing Zero Custom. It's the Wing Gundam that fans of both versions of the series can agree on.

The MG Wing Gundam Ver.Ka features full bird mode transformation, an upgraded buster rifle system with six additional stored buster rifles on attachable arm units, and Hajime Katoki's signature Ver.Ka panel line precision throughout.

This kit is designed for intermediate builders. The Master Grade engineering delivers a substantial, rewarding build with strong colour separation across the white, blue, and red armour. The transformation to bird mode is mechanical rather than parts-swap, and the expanded buster rifle loadout with six additional rifles stored on arm-mounted units gives you serious display options beyond the standard Wing Gundam configuration. If you're building a Gundam Wing MG shelf, this is the anchor it needs.

What Makes This Kit Special

  • Katoki Ver.Ka Redesign: Hajime Katoki's unique treatment blends the original TV Wing Gundam's sturdier wings and transformation with the refined proportions and elegance of Wing Zero Custom.
  • Full Bird Mode Transformation: Mechanical transformation to bird mode, faithfully recreating Wing Gundam's signature alternate configuration.
  • Expanded Buster Rifle System: Six additional buster rifles included and storable on attachable arm units, significantly upgrading the original armament for display impact.
  • Ver.Ka Panel Line Precision: Katoki's sharp proportions and detailed surface work throughout the armour and frame.
  • Complete Original Armament: Shield, buster rifle, and beam saber all included alongside the expanded loadout.
  • Master Grade Engineering: MG-level inner frame and articulation for a substantial, poseable display piece at 1/100 scale.
  • Excellent Colour Separation: White, blue, and red armour achieved through part moulding, minimal painting required.
  • Snap-Fit Assembly: No glue required throughout the build.

What's In The Box

  • Buster Rifle (x1, standard)
  • Additional Buster Rifles (x6, storable on arm units)
  • Arm units for buster rifle storage (x1 set)
  • Shield (x1)
  • Beam Saber (x1)
  • Hand parts (multiple sets)
  • Marking stickers
  • Instruction manual

Compatible Display Stands

This is a 1/100 MG scale kit. Compatible action bases include the Bandai Action Base 1 - Universal Gunpla Display Stand and the Bandai Action Base 4 - Display Stand for 1/100 Scale Gunpla. Action Base sold separately.

Build Your Gundam Wing MG Collection

Expand your After Colony MG lineup with other kits available at Mecha Express:

Build Specifications

Series Mobile Suit Gundam Wing / New Mobile Report Gundam Wing
Grade Master Grade Ver.Ka (MG)
Scale 1/100
Mobile Suit XXXG-01W Wing Gundam
Pilot Heero Yuy
Faction Gundam Pilots / Operation Meteor
Manufacturer Bandai Spirits
Weight 1,001g
Barcode 4573102628398
SKU 5062839
Skill Level Intermediate
Assembly Snap-fit, no glue required
Transformation Full bird mode transformation (mechanical, not parts-swap)
Design Hajime Katoki Ver.Ka redesign

 

Perfect For

  • Gundam Wing fans who want Katoki's definitive Wing Gundam redesign as the centrepiece of their After Colony MG shelf
  • Intermediate builders looking for a substantial MG build with mechanical transformation and an expanded weapons loadout
  • Ver.Ka collectors building the complete Katoki redesign set of all five original Gundam Wing suits
  • Collectors who want the Wing Gundam that bridges the TV series and Endless Waltz aesthetics in a single kit
  • Builders who appreciate the expanded buster rifle arm unit display configuration for serious shelf impact
  • Anyone who wants a transformable MG Wing Gundam with Katoki's signature panel line precision throughout

Builder Notes

A striking Ver.Ka showcase with one of the most recognisable silhouettes in the Wing lineup. The engineering reflects its 2006 release date, and a handful of specific issues are worth addressing during assembly rather than discovering later on the shelf.

Buster Rifle Wrist Sag (Most Common Posing Issue): The buster rifle is significantly heavier than the wrist ball joint can hold over time. Even right after posing, the arm will begin to sag downward under the load. The fix applied most consistently by the community is to apply a thin layer of plastic cement to the wrist ball joint peg and allow it to set completely before reassembling. A second layer can be added if still needed. Nail polish works as an alternative. The workaround for display if the joint remains marginal is to rest the buster rifle across the top of the shield for support.

Back-Heavy Wing Balance: The wing assembly shifts the kit's centre of gravity significantly rearward. Without the wing tips making contact with the ground or a display stand providing support, the kit will not stand upright unsupported. This is not a defect — it is a geometry issue inherent to the design. An Action Base is the clean solution. Alternatively, the wings can be angled so the tips act as a rear ground contact point, which works for a neutral standing pose.

Faceplate Seating: The faceplate sits in the head without locking positively into place. It shifts and goes crooked with any incidental contact. A very small amount of Tamiya Extra Thin Cement applied around the faceplate seam after final positioning will hold it permanently without visible residue.

Rubber Wing Feather Tips: The soft rubber feather tips at the wing edges are fragile and the pegs they connect to loosen with any repeated handling. Treat these as permanent once placed. Avoid removing and refitting them during posing. The main wing hinges into the backpack via a hard plastic connection that is actually quite tight — do not confuse the two. The feather pegs are the vulnerable part.

Buster Rifle Clip Points: The small claw-style attachments that clip the buster rifle components together are described across multiple reviews as fragile. Do not force these clips. Seat them slowly and if there is resistance, check the alignment before applying pressure.

Waterslide Decal Volume: The Ver.Ka marking sheet is extensive. Application on the curved wing surfaces and angled armour panels is particularly unforgiving of misalignment, as decals on uneven surfaces will silvering or tear if not handled carefully. Use Micro Sol setting solution on any decal going over a non-flat surface. Apply decals to a gloss-coated surface for best adhesion, then seal with a topcoat once dry.

Stability Rating: 5/10. The most back-heavy kit in the Wing MG lineup at this scale. Requires either an Action Base or deliberate wing-tip ground contact to stand without toppling. On a stand, it holds well and displays beautifully. Not recommended for an open-shelf display without support given the fall risk to the faceplate and feather tips.

The Fixes: Cement the wrist ball joint during assembly. Use an Action Base or angle the wing tips to the ground for stable display. Cement the faceplate into its final position with Tamiya Extra Thin Cement. Treat the rubber feather tip pegs as permanent once placed. Handle the buster rifle clip points slowly without forcing. Use Micro Sol and a gloss base coat for the waterslide decal application.

Fast Australian Shipping

  • Same Day Dispatch: Orders placed before 2pm weekdays ship same day. Orders after 2pm or on weekends ship next business day.
  • Australian Stock: In stock and ready to ship Australia-wide from Mecha Express. The MG 1/100 XXXG-01W Wing Gundam Ver.Ka is a Bandai Spirits Master Grade kit featuring Hajime Katoki's unique redesign, full bird mode transformation, and an expanded buster rifle system with six additional rifles on arm-mounted storage units.

Snap-fit assembly, no glue required. Minimal paint needed thanks to excellent colour separation. Waterslide decals sold separately. Action Base sold separately. Suitable for intermediate builders.

Last updated: 12 May 2026 (AEST)

Mobile Suit Gundam Wing Series

Experience the awe-inspiring world of "Mobile Suit Gundam Wing" like never before with our meticulously crafted Gunpla models—each a perfect embodiment of the series' intricate storytelling and intense mecha action! In the space colonies' quest for independence from the oppressive Earth Alliance, they send five state-of-the-art Gundams to Earth, piloted...

Read More
Mobile Suit Gundam Wing Series

Assembly Guide

Skill Level.2 Basic modeling skills are required. Parental supervision may be required for younger children. These kits are generally suitable for beginner builders. A basic set of modeling tools are required including nippers, hobby knife, sanding sticks/paper, file, and tweezers. No glue is needed for the general assembly. Parts will need to be removed by using a pair of nippers and cutting the part away from the runner. Parts may require clean-up where they were removed from the runner.

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

What makes these Gunpla kits the hottest sellers?

These kits are fan favourites for their detailed design, affordability, and build size, offering a balanced and enjoyable building experience.

Are these hottest seller kits suitable for beginners?

Absolutely! Especially the HG kits, which are known for their fewer parts and simplicity, making them a great starting point for new builders.

What is the level of detail in the MG and RG hottest sellers?

MG kits boast a detailed inner frame and additional parts, while RG combines MG’s complexity with HG’s size for an intricate, compact build.

Can I get replacement parts if I lose some during the build?

Yes, if you buy a kit from Gundam Express Australia we will source replacement parts for you. This is not a quick process as parts need to come from Bandai in Japan.

How much space will I need to display these Gunpla?

HG and RG Gundam kits are compact, while MG Gundam are larger but still manageable. You won’t need too much space to showcase these masterpieces beautifully.