🚚 Spend more to unlock FREE shipping.
We're on a break. The store's open, but orders placed now will be dispatched from Tuesday 6 October.

1 review

Bandai 1/100 MG Duel Gundam Assault Shroud Z.A.F.T. Mobile Suit GAT-X102

$67.99 AUD
Yzak Joule's GAT-X102 Duel Gundam, built up with the full Assault Shroud heavy armour set. Five swappable weapons, an openable cockpit and two Yzak Joule pilot figures round out the loadout. Full range of motion carries through even with the Assault Shroud fitted, and the white, blue and yellow ZAFT scheme is moulded in rather than painted on.
From $10
4 × $16.99
Key features
  1. Two Configurations, One Kit: Build the base Duel Gundam or add the Assault Shroud for the up-armoured combat loadout, and swap between the two once painted or panel-lined.
  2. Five-Weapon Arsenal: The 57mm rifle, Shiva rail gun, five-barrel missile pod and 350mm bazooka all mount onto the Assault Shroud for a genuinely loaded display pose.
  3. Openable Cockpit With Two Pilot Figures: Pop the chest hatch to show off the cockpit interior, with a sitting and a standing Yzak Joule figure both included.
Returns & Refunds
  1. Australian Consumer Law Compliance: Mecha Express Australia strictly adheres to the Australian Consumer Law for all transactions.
  2. Contact Process for Issues: If you encounter any issues with your purchase, you should first contact Mecha Express Australia via email at support@mechaexpressaustralia.com.au, describing the problem and providing photos and contact details.
  3. Response and Advice: Mecha Express Australia will promptly respond to your email to discuss the issue and advise on the next steps.
  4. USA Customer Policy: USA customers are not eligible for returns, refunds, or compensation for any issues including lost, stolen, or incorrectly delivered items.
  5. Return Conditions for AU and NZ: Items must be returned in their original, undamaged, and resalable packaging if requested by Mecha Express Australia.
  6. Refund and Replacement Policy: Australian and New Zealand customers may receive replacements or refunds for reasons like change of mind (before dispatch with a restocking fee), incorrect items, lost/stolen/damaged parcels during delivery, missing parts, or inability to supply an item. Mecha Express Australia will give you a Reply Paid number for you to return these items at no cost to you at your local Australia Post outlet.
  7. Non-refundable Items: Items that cannot be refunded include those that are opened, used, partly assembled, lost parts, self-damaged items, or items found with no issues.
  8. Duplication Promise: Returns are accepted if you receive a duplicate gift, provided the item is returned in resalable condition and at your own expense.
  9. Pre-Order Cancellation: While pre-order refunds are typically not offered, requests will be considered but subject to a 10% restocking and administration fee.
  10. Restocking and Administration Charge: A 10% fee applies to canceled orders or refunds to cover non-refundable third-party fees, calculated on the total value of the products and shipping costs.
Series Assembly Guide FAQ

Bandai 1/100 MG Duel Gundam Assault Shroud Z.A.F.T. Mobile Suit GAT-X102

Yzak Joule's heavy hitter, armoured for war

The GAT-X102 Duel Gundam was one of the five stolen Earth Alliance prototypes that ZAFT turned into its own machines during the First Alliance-PLANT War. This kit gives Yzak Joule's suit the Assault Shroud treatment, a full set of heavy add-on armour that trades some of the base Duel's mobility for serious close-range firepower.

Build it as the standard Duel Gundam, or bolt on the Assault Shroud for the up-armoured combat loadout seen in Mobile Suit Gundam SEED. Either way, this is a kit for builders who want options on the shelf.

Build difficulty

This is a Master Grade kit with two configurations to build, so budget more time than a standard MG. Expect the base Duel Gundam assembly first, then a second pass fitting the Assault Shroud's armour panels, weapon mounts, and the opening cockpit hatch. Builders who have finished a Master Grade kit before will get through this comfortably. First-time MG builders can still manage it, just go slowly around the Assault Shroud's skirt and shoulder attachment points, which need a firm, deliberate click rather than a light press (see What to Watch For below).

Technical highlights

The Duel Gundam's inner frame gives full range of motion at the shoulders, hips, knees and ankles, and that articulation carries through even with the Assault Shroud fitted. The chest hatch opens to show a moulded cockpit interior, and colour separation covers the white, blue and yellow SEED-era ZAFT scheme without needing paint for a clean out-of-the-box finish.

What Makes This Kit Special

  • Two configurations, one kit: build the base Duel Gundam or add the Assault Shroud for the up-armoured combat loadout, and switch between them once the parts are painted or panel-lined.
  • Full five-weapon arsenal: the 57mm high-energy rifle with 175mm grenade launcher, the Shiva 115mm rail gun, the 250mm five-barrel missile pod and the 350mm bazooka all mount onto the Assault Shroud, alongside twin beam sabers for the base suit.
  • Openable cockpit hatch: pop the chest hatch for a display angle most Gundam SEED kits don't offer.
  • Two Yzak Joule pilot figures: a sitting figure for the cockpit and a standing figure for a display base, both included.
  • No paint needed for a clean finish: the white, blue and yellow ZAFT colour scheme is moulded in, not stickered on.

What's in the box

  • Duel Gundam GAT-X102 plastic runners
  • Assault Shroud heavy armour runners
  • Shield
  • 57mm high-energy rifle with 175mm grenade launcher
  • Shiva 115mm rail gun
  • 250mm five-barrel missile pod
  • 350mm bazooka
  • Two beam sabers
  • Two Yzak Joule pilot figures (sitting and standing)
  • Polycap set
  • Sticker sheet
  • Instruction manual

Compatible accessories

No display base is included with the kit. For dynamic combat poses with the Assault Shroud's weapon loadout, pair the MG Duel Gundam Assault Shroud with the Bandai Action Base 4, the standard 1/100 scale display stand.

Build your Cosmic Era collection

Stock across the Gundam SEED lineup moves fast. Right now the Bandai 1/144 HG Strike Freedom Gundam (Revive) is in stock alongside the Duel Gundam Assault Shroud. Check back for further Cosmic Era restocks.

Build specifications

  • Series: Mobile Suit Gundam SEED
  • Grade: Master Grade (MG)
  • Scale: 1/100
  • Mobile Suit: GAT-X102 Duel Gundam (Assault Shroud configuration)
  • Pilot: Yzak Joule
  • Faction: ZAFT
  • Timeline: Cosmic Era (C.E. 71)
  • Manufacturer: Bandai Spirits
  • Kit packaged weight: 790g (retail box 39 x 31 x 8.4cm)
  • Barcode: 4573102629043
  • Skill Level: Intermediate to Advanced
  • Assembly: Snap-fit, no glue required
  • Paint Required: Optional
  • Special Features: Detachable Assault Shroud armour, openable cockpit hatch, two pilot figures

Perfect for

  • Gundam SEED collectors building out the ZAFT side of the shelf
  • Builders who want a kit that displays two different ways
  • Anyone chasing Yzak Joule's mobile suit specifically
  • MG builders who enjoy a weapon-heavy, accessory-heavy build
  • Collectors building alongside the in-stock Strike Freedom Gundam Revive

Fast Australian shipping

Dispatched same day from Brisbane if ordered before 2pm AEST on weekdays. Free shipping Australia-wide on orders over $199. Packed securely in a sturdy outer box with water-soluble cornstarch void fill that dissolves cleanly in the sink.

What to watch for

More than one build write-up flags the same spot on this kit: the Assault Shroud's front skirt and shoulder armour panels can pop loose during posing, particularly once the arms are moved through a full range of motion. It's a friction-fit issue rather than a structural fault, and a small dot of clear-drying glue or a slightly firmer push on final assembly keeps the panels seated. The base Duel Gundam underneath doesn't share the issue.

Builder Tips: Test-fit the Assault Shroud's skirt armour a couple of times before final assembly so you know how far the clips need to seat. If you're planning to switch between the base Duel Gundam and the Assault Shroud configuration, avoid gluing the armour mounts so the parts stay swappable.

Build notes

Snap-fit assembly, no cement required for a standard build. Nippers and a hobby knife recommended for clean part removal. Two configurations to build means a longer session than a single-mode MG, budget 4 to 6 hours. Recommended age 15+.

Last updated: 11 August 2026 (AEST)

Mobile Suit Gundam Seed & Seed Destiny Series

"In 'Gundam SEED', humanity is divided between Naturals and genetically enhanced Coordinators. Tensions explode when ZAFT, a Coordinator military faction, steals prototype Gundams. Kira Yamato, a Coordinator, is thrust into the chaos, piloting a Gundam for the Naturals' defense. Friendships are tested, particularly between Kira and his childhood friend, Athrun...

Read More
Mobile Suit Gundam Seed & Seed Destiny Series

Assembly Guide

Skill Level.3. Basic modeling skills are essential. These kits are not recommended for beginners or children due to the high level of complexity of assembly and the sheer volume of parts. Experience in building more complex Gunpla models is recommended. Parental supervision is essential. A full set of hobby tools is recommended that includes, nippers, hobby knives, sandpaper, sanding sticks, files, buffing files, glues, tweezers, and decal adhesive/softener. Parts will need to be removed by using a pair of nippers and cutting the part away from the runner. Parts may require clean-up where they were removed from the runner.

Gunpla (plastic model kits) are a snap together assembly and do not need plastic cement to complete. We always recommend having some plastic cement handy as a part of your modeler's tool kit. If you prefer to fix your model in a particular pose then plastic cement will work. Plastic cement is also perfect to use if a joint is loose. Apply plastic cement in a single thin layer and allow it to dry completely before test fitting. Re-apply more cement if necessary.

Gunpla (plastic model kits) are designed to be built and displayed without the need for painting. Kits are molded in different colours replicating the colours of the actual mecha from the Mecha series. A technique called colour separation, where multiple parts of the model are molded in different colours on the same sprue is also used. Mecha kits often include stickers or water-slide decals that can be applied to the model to enhance its appearance. Some Gunpla kits come with pre-painted parts or parts with pre-applied details, such as metallic or translucent finishes.

Many modelers still choose to paint their kits to customize and add further detail. Painting allows for more creativity and personalization, enabling modelers to achieve unique effects, weathering, and colour schemes that may not be available out of the box. However, the kits are designed to be enjoyable and visually appealing even without painting, making them accessible to a wide range of hobbyists.

Frequently Asked Questions

What's the difference between the base Duel Gundam and the Assault Shroud configuration?

The Assault Shroud is a set of heavy add-on armour with its own weapon loadout: the 57mm rifle, Shiva rail gun, five-barrel missile pod and 350mm bazooka. Build the kit as the standard Duel Gundam, or fit the Assault Shroud over the top for the up-armoured combat look. Both configurations use the same base kit.

Does the kit include a pilot figure?

Yes. Two 1/100 scale Yzak Joule figures are included, a sitting figure for the cockpit and a standing figure for a separate display base.

Does the kit come with a display stand?

No, a stand isn't included. The Bandai Action Base 4 is the standard 1/100 scale stand if you want to display the Duel Gundam mid-pose.

Do I need glue or paint to finish this kit?

No glue is needed for a standard build, and the parts are moulded in the correct white, blue and yellow ZAFT colours, so paint is optional rather than required.

What skill level is the MG Duel Gundam Assault Shroud?

It sits at intermediate to advanced. The two-configuration build and the Assault Shroud's armour panels take longer than a standard Master Grade, so builders who've finished at least one MG before will get the most out of it, though a careful first-time MG builder can still manage it.